Modeling Mask Powder: How to Mix, Apply and Choose (Uhox Centella, Collagen, Pearl and Charcoal)

By Edmond Lin, M1 Nail & Beauty Supply, Markham, Ontario. Last updated 25 October 2026. Directions are taken from the Uhox bag labels and from Uhox's own product catalogues.

A modeling mask is a powder that you mix with water, spread over the face in a thick layer and peel off in one piece once it sets. Uhox (怡孜), a Korean professional skincare brand, makes its modeling masks in 1 kg bags for salons. Uhox says the algin in the powder fits closely to the skin, keeps delivering the active ingredients and holds in moisture while the mask is on. This guide covers mixing, applying and removing the mask, where it goes in a facial, and how the four Uhox masks differ.

How to mix and apply a modeling mask

  1. Mix for one client at a time. Powder and water 1 : 1, the ratio printed on the Uhox bag. The mask starts to set within minutes, so do not mix it ahead.
  2. Stir for 1 to 2 minutes until the paste is smooth.
  3. Apply a thick, even layer over the face, keeping clear of the eyes.
  4. Leave it on for 15 to 20 minutes. Once it has set into a rubbery layer, lift it at an edge and peel it off in one piece.
  5. Wipe the face with toner to clear any residue.

Do not use the mask near the eyes or on skin with a wound. Close the bag after each use and keep it in a cool, dry place away from direct sunlight and humidity.

Where the modeling mask goes in a facial

Uhox's catalogue sets out its facial treatment in this order. The modeling mask is the last mask, after the sheet mask and before the finishing cream.

  1. Cleanse
  2. Deep cleanse
  3. Toner
  4. Korean-style massage with Luminous Silky Massage Cream, 10 to 15 minutes, then wipe it off
  5. Ampoule (serum)
  6. Sheet mask
  7. Modeling mask
  8. Finishing cream

For rough, uneven or sagging skin, Uhox suggests leaving the massage cream on and going straight into the modeling mask without wiping. Peel the mask off, then wipe away what is left of the cream.

Which Uhox modeling mask to choose

Mask What Uhox says it is for Key ingredients Skin type
Centella Smoothing Calming and intense moisture Centella asiatica extract, tea leaf, sodium hyaluronate, allantoin All skin types; Uhox's Chinese catalogue recommends it for sensitive or stressed skin
Collagen Moisture Moisture and firmness Hydrolyzed collagen, sodium hyaluronate, aloe leaf extract, allantoin All skin types
Pearl Brightening Brightening dull, tired-looking skin Pearl extract, niacinamide, ascorbic acid (vitamin C), sodium hyaluronate All skin types
Charcoal Clean pores: the label says the charcoal powder takes up dead skin cells and waste in the pores Charcoal powder Not stated (this mask is not in the Uhox catalogue)
Uhox modeling mask powders compared: Centella Smoothing, Collagen Moisture, Pearl Brightening and Charcoal, 1 kg bags
The four Uhox modeling masks in 1 kg bags, with what Uhox says each one is for.

The key ingredients listed are the ones Uhox names in its catalogue that also appear on the ingredient list printed on the bag.

Single bag or case

Each mask comes in a 1 kg resealable bag, and in a case of 20 bags for salons that use it every day. For the massage step Uhox makes Luminous Silky Massage Cream, and the range also includes Pure Jojoba Oil; everything is on the Uhox page, and more facial products are in Facial Care.

Frequently asked questions

What is the mixing ratio for Uhox modeling mask powder?

Powder and water 1 : 1, as printed on the bag. Uhox's printed catalogues give other ratios, so go by the label on the bag you are using.

How long do you leave a modeling mask on?

15 to 20 minutes. Peel it off in one piece once it has set.

Can I use a modeling mask after a massage cream?

Yes. In Uhox's facial order the massage comes before the masks. For rough, uneven or sagging skin, Uhox suggests applying the mask over the massage cream without wiping it off first, then wiping off the rest once the mask is peeled away.

Which Uhox mask is best for sensitive skin?

Uhox's Chinese catalogue recommends Centella Smoothing for sensitive or stressed skin. Keep any modeling mask clear of the eyes and off broken skin.

What do I do after peeling off the mask?

Wipe the face with toner, then apply a finishing cream. In Uhox's facial order the finishing cream is the last step.

Where can I buy modeling mask powder in Canada?

M1 Nail & Beauty Supply stocks Uhox modeling masks in Markham, Ontario at wholesale prices, as single 1 kg bags and cases of 20, with in-store pickup and shipping across Canada.

See every Uhox product we stock in Markham, Ontario.

Shop Uhox

Directions and ingredient notes come from the Uhox bag labels and the Uhox product catalogues. Always follow the directions on the package you have.