Mr Nail W277 vs W278 vs 2nd Gen Pro and Pro Max: Which Nail Drill Should You Buy?
By Edmond Lin, M1 Nail & Beauty Supply, Markham ON · Last updated: October 28, 2026
The Mr Nail W277 and W278 are both portable, rechargeable nail drills, and they are built for different jobs. The W277 has a 24V brushless motor rated up to 30,000 RPM and 520 g of torque, which suits full-time techs removing hard gel and acrylic. The W278 has a coreless motor rated up to 25,000 RPM and 300 g of torque. It suits gel polish removal, prep and mobile work.
New in October 2026: Mr Nail added the 2nd Gen Pro (12V coreless, 30,000 RPM) and the 2nd Gen Pro Max (24V brushless, 35,000 RPM). They share one body, an IP65 waterproof handpiece and an optional charging base. See the 2nd Gen comparison below.
Mr Nail (MRNAIL, 美甲先生) is a nail brand founded in 2019 that sells gels, lamps, drills and tools. Its official store is mrnail.cn. M1 stocks all four drills in Markham, Ontario. The specs below come from Mr Nail's own product pages (read September and October 2026) and from the product sheets that ship with our stock. Where the two sources disagree, we say so.

W277
For full-time techs removing hard gel and acrylic

2nd Gen Pro
Coreless, rechargeable: gel removal, prep and mobile work

2nd Gen Pro Max
Brushless: the strongest of the four, for hard gel and acrylic
Mr Nail W277 vs W278: side-by-side specs
| W277 Portable 24V Brushless | W278 Rechargeable 25,000 RPM | |
|---|---|---|
| Motor | Brushless, 24V | Coreless, dust-proof spindle |
| Top speed | 30,000 RPM | 25,000 RPM (adjustable from 0) |
| Torque (Mr Nail figure) | 520 g | 300 g |
| Battery | 3000mAh; about 7 hours of continuous use after a 4-hour charge | Up to 20 hours per charge on our product sheet. Mr Nail's page calls this standby time, so expect less under load. |
| Noise (Mr Nail figure) | Not published (“silent brushless motor”) | 47.4 dBA normal, 57.4 dBA at top speed |
| Forward / reverse | Not listed | Yes |
| Handy extras | Auto start/stop: the handpiece pauses when docked and starts when lifted. Foldable built-in stand and speed knob. | Digital display, aluminium body, Type-C charging, speed knob |
| Handpiece size | 13.3 × 3 cm | 125 × 19 mm |
| In the box | Drill unit, handpiece, 3 bits, handpiece cable, USB charging cable, manual | Drill unit, handpiece, 1 XF carbide bit, connection cable, USB charging cable, manual |
| Colours at M1 | Green, White | Wood, Grey |
| Warranty at M1 | 6 months | 6 months |
New: Mr Nail 2nd Gen Pro vs Pro Max
The 2nd Gen Pro and Pro Max are Mr Nail's newest rechargeable drills. They share one body, a round full-view display and an IP65 waterproof handpiece; the difference is the motor. The Pro has a 12V coreless motor rated up to 30,000 RPM and 400 gf·cm of torque. The Pro Max has a 24V brushless motor rated up to 35,000 RPM and 550 gf·cm.
| 2nd Gen Pro (coreless) | 2nd Gen Pro Max (brushless) | |
|---|---|---|
| Motor | Coreless, 12V | Brushless, 24V |
| Top speed | 30,000 RPM | 35,000 RPM |
| Torque (Mr Nail figure) | 400 gf·cm | 550 gf·cm |
| Spindle dynamic balance | ≤ 5 mg | ≤ 3 mg |
| Noise (Mr Nail figure) | ≤ 50 dB | Not published |
| Battery | 2,600 mAh, USB Type-C charging | 2,600 mAh, USB Type-C charging |
| Handpiece | IP65 waterproof and dustproof; on the W904 base, lift to start and put down to stop | IP65 waterproof and dustproof; on the W904 base, lift to start and put down to stop |
| Display | Speed, forward/reverse, left/right-hand mode, battery level | Speed, forward/reverse, left/right-hand mode, battery level |
| Forward / reverse | Yes (double-press the button) | Yes (double-press the button) |
| In the box | The drill and 1 free drill bit; the W904 base and W905 box are sold separately | The drill and 1 free drill bit; the W904 base and W905 box are sold separately |
| Colours at M1 | White W901, Purple W903 | Starry Gray W906, Pink W908 |
| Warranty | 1 year | 1 year |
Compared with the W277 and W278, the 2nd Gen handpiece is IP65 sealed for wet prep, the round display shows speed, direction, left/right-hand mode and battery level, and the warranty is 1 year (6 months for the first-generation drills at M1). Mr Nail prints the 2nd Gen torque in gf·cm and the W277/W278 torque in grams, so read all of these as Mr Nail's own ratings, not lab measurements.
The 2nd Gen station: W904 base and W905 UV box
Both drills charge on their own through USB Type-C. The W904 multifunctional base is optional: set the drill in it to charge (it stops charging above 70 % battery to protect the battery), insert the handpiece in the ring holder to pause it, and keep 30 bits in the built-in storage. The W905 UV sterilizer box sits over the base's bit storage or stands alone; Mr Nail rates it at 99.99 % on specified bacteria (E. coli, S. aureus, C. albicans). UV only reaches exposed surfaces, so clean the bits first and follow your local salon disinfection rules.
Which one should you buy?
Choose the W277
Buy the W277 if the drill is your main salon tool. It has about 1.7 times the torque of the W278 (520 g vs 300 g). Torque decides whether the bit keeps its speed when you press into hard gel, acrylic or a thick builder overlay. The auto start/stop and the built-in stand also save a few seconds on every pick-up, which adds up over a full book.
Choose the W278
Buy the W278 if you mainly remove gel polish, prep natural nails or work mobile. 25,000 RPM is enough for soak-off gel, cuticle work and refining. Its noise figure (47.4 dBA in normal use) is published, and forward/reverse makes it easier for left-handed techs. It is also the better first drill for a new tech or a home user.
Choose the 2nd Gen Pro Max
Buy the Pro Max if you want the strongest drill in this guide and a tidy cordless station. Its 24V brushless motor is rated up to 35,000 RPM and 550 gf·cm, the highest figures of the four. The IP65 handpiece copes with wet prep, and the optional W904 base keeps the drill charged with 30 bits beside it.
Choose the 2nd Gen Pro
Buy the Pro if you want the 2nd Gen handpiece and display at a lower price. Its 12V coreless motor (30,000 RPM, 400 gf·cm, ≤ 50 dB) is quiet and quick to spin up, which suits gel polish removal, prep and mobile work. It uses the same W904 base and W905 UV box as the Pro Max.
If you are a full-time tech who already owns a corded salon drill, either one works as a second, portable machine. The W277 is closer to salon-drill performance. The W278 suits lighter work such as gel polish removal and prep.
Brushless vs coreless: what is the difference?
A brushless motor has no carbon brushes rubbing inside it. It runs cooler, wears more slowly and holds speed under load, which is why the W277 is the stronger of the two. A coreless motor has a lightweight rotor with no iron core. It spins up quickly and runs smoothly and quietly, but it delivers less torque. That trade-off is why the W278 is less suited to heavy acrylic removal. The 2nd Gen line follows the same split: the Pro Max is brushless and the Pro is coreless.
What speed should I use?
Mr Nail's own guidance for the W278 is to use low speeds on natural nails and higher speeds for removing or sculpting gel polish, gel tips, hybrid gel and hard gel. That rule applies to all four drills in this guide. Start low, let the bit do the work, and only raise the speed when you are cutting through product, never through the natural nail plate.
Frequently asked questions
Is the Mr Nail W277 good for acrylic?
Yes. The W277 and the 2nd Gen Pro Max are the Mr Nail drills we recommend for acrylic and hard gel. Its 24V brushless motor is rated up to 30,000 RPM and 520 g of torque, which holds speed better under pressure than the 300 g W278. The Pro Max is rated higher still: 24V brushless, 35,000 RPM, 550 gf·cm.
How long does the battery last?
Mr Nail rates the W277 at about 7 hours of continuous use after a 4-hour charge (3000mAh battery). Our product sheet rates the W278 at up to 20 hours, but Mr Nail's page describes that figure as standby time, so real working time will be shorter. The 2nd Gen Pro and Pro Max use a 2,600 mAh battery with Type-C charging; Mr Nail does not publish a run time for them.
Do they come with drill bits?
The W277 comes with 3 bits and the W278 with 1 XF carbide bit. For more shapes and grits, see our carbide drill bits. Mr Nail doesn't publish the shank size, so bring a bit you already use to the store and we'll check the fit. The 2nd Gen Pro and Pro Max come with 1 drill bit as a free gift.
What is the warranty?
The W277 and W278 carry a 6-month warranty at M1; the 2nd Gen Pro, Pro Max, W904 base and W905 box carry 1 year. Keep your receipt and contact us at the Markham store if the drill develops a fault.
What is the difference between the Mr Nail 2nd Gen Pro and Pro Max?
The motor. The Pro has a 12V coreless motor (30,000 RPM, 400 gf·cm) and the Pro Max a 24V brushless motor (35,000 RPM, 550 gf·cm). Everything else is shared: the IP65 handpiece, the round display, the 2,600 mAh Type-C battery, and the W904 base and W905 UV box.
Is the 2nd Gen Pro Max better than the W277?
On paper, yes. Both are brushless, but the Pro Max is rated faster (35,000 vs 30,000 RPM) and adds an IP65 handpiece, a display with battery level and direction, and a 1-year warranty. Mr Nail lists their torque in different units (550 gf·cm vs 520 g), so treat the torque as close rather than directly comparable. The W277 is still a good pick if you like its built-in folding stand.
Do the 2nd Gen drills need the W904 base?
No. The 2nd Gen Pro and Pro Max charge on their own through USB Type-C. The W904 base is an add-on that charges the drill, pauses it when the handpiece is in the ring holder, holds 30 bits and takes the W905 UV sterilizer box.
Where can I buy Mr Nail drills in Canada?
M1 Nail & Beauty Supply stocks the W277, the W278 and the 2nd Gen Pro and Pro Max (plus the W904 base and W905 UV box) at our Markham, Ontario store, with in-store pick-up (usually ready in 2 to 4 hours) and shipping across Canada. See every Mr Nail product we carry on the Mr Nail brand page.
Which Mr Nail lamp goes with these drills?
For a full cordless station, the W215 Pro Max lamp set runs about 3.5 hours on its 5000mAh battery and cures at 365, 395 and 660 nm. For flash-curing tips and sidewalls, the W173 flash-cure lamp strip uses a focused 395 nm LED with 15 s and 60 s timers.
See every Mr Nail product we stock in Markham, Ontario.
Shop Mr NailBrowse the category: E-File & Bits. More guides on this topic: E-Files & Drill Bits.
Sources
- Mr Nail, Portable 24V Brushless Nail Drill W277 (24V, 30,000 RPM, 520 g torque, 3000mAh, 7 h use, 4 h charge). Read 21 Sept 2026.
- Mr Nail, Rechargeable Electric Nail Drill 25000 RPM W278 (coreless, 300 g torque, 47.4/57.4 dBA, forward/reverse, standby time). Read 21 Sept 2026.
- Mr Nail, Pro Max UV/LED Nail Lamp W215 (39 LEDs, 365/395/660 nm, 5000mAh, 3.5 h). Read 21 Sept 2026.
- Mr Nail, 2nd-Generation Portable Pro Nail Drill (12V coreless, 30,000 RPM, 400 gf·cm, ≤ 5 mg, ≤ 50 dB, from the product images; the page text gives 35,000 RPM and ≤ 3 mg, which are the Pro Max figures). Read 28 Oct 2026.
- Mr Nail, 2nd-Generation Portable Pro Max Nail Drill (24V brushless, 35,000 RPM, 550 gf·cm, ≤ 3 mg, 2,600 mAh, IP65; W904 base and W905 UV box). Read 28 Oct 2026.
- M1 product sheets for the W277, W278, W215 and W173 (box contents, dimensions, colours, 6-month warranty).

